|
| |
3 phases count down timer unit
The MinuTri is
a set of two units allowing to manage a three phases electric installation.
These two units are linked together with a command cable.
Originaly
designed as security set to equiped the electric cooker of memory deseases
suffering people, this set is three phases count down timer which can be used in
a large panel of applications.
These two units
are:
MinuTri-C:
 
 |
This first
unit is the command part of the set. |
|
This unit
is the user interface. |
|
The MinuTri-C
includes:
 |
A large
leds display allowing the possibility of a count dowm timer from 5
seconds to 59 minutes and 59 seconds. |
|
five
buttons (+, -, OK, ESC and Start/Restart/Stop) for operation
|
|
The
link with the MinuTri-P. |
|
|
A press on
the Start/Restart/Stop button wakes up the MinuTri, activates the relay et
starts the count dowm.
|
|
In
operation, the diplay shows the remaining time. |
|
During the
last minute, the tens of minutes and the minutes digits are blinking.
|
|
Starting at
30 seconds before the end of the programmed time, increasingly louder bips
are generated. |
|
A less than 2 seconds
press on the Start/Restart/Stop button restarts the timer at the
pre-programmed value.
|
|
A greater
than 2 seconds press on the Start/Restart/Stop button deactivates the relay
and sets the MinuTri-C in active waiting mode with the pre-programmed time
displayed and the four decimal points displaying successively.
|
|
After
2 minutes of inactivity, the MinuTri enters the low energy mode: the display
is turned of and only one decimal point is blinking. |
|
A more than 3 seconds simultaneous
press on the OK, + et -
buttons enters the timer time programming. |
|
A more than
3 seconds simultaneous press on the ESC, + et -
buttons enters the bips loudness adjustment. |
|
Complete
informations on the case's label allows the use of the MinuTri-C without
user manual. |
|
Case dimensions: 120mm x 160mm x 91mm.
|
|
Possible
fixing with screws.
|
MinuTri-P:
 
|
This second
unit is the power part of the set. |
|
This unit
is inserted between the power wall connection and the load.
|
|
Le
MinuTri-P includes:
|
The three phases input. |
|
The relay and Minutri-C power supply. |
|
The
three phases relay. |
|
The
connection with the MinuTri-C. |
|
The
three phases output. |
|
|
The wiring
instructions are given on a label inside the top of the case.
|
|
Case dimensions: 80mm x 120mm x 56mm.
|
|
Possible
fixing with screws. |
|
Possibility
of partialy or totaly pre-wired versions.
|
Advantages
| Innovative, robust, easy to install and to
configure solution as three phases count dowm timer. |
| Simple interface. |
Price
| Description |
Référence |
Prix |
| MinuTri-C |
E15516 |
395.00 CHF |
| MinuTri-P |
E15518 |
645.00 CHF |
| MinuTri-C + MinuTri-P |
E15516 + E15518 |
950.00 CHF |
For more information:
info@pongo.info
|
![[Logo de l'entreprise]](../images/LOGO_pongo_vert.jpg){kind=logo}
