[Logo de l'entreprise] 

GSM Remote Ctrl Temp - Humidity Solar Sensors Leds lighting, Dmx Modbus DmxMidi General

ACC8TMod
Remonter ACC8TMod ACC8T8RHMod SCTRH SC2T1TRH ACC4I6O6TRHMod ACC4I9O3TRHMod THS10 TS06-U

 

 

Remonter

 

Modbus 8 temperatures measurement unit

 

 

 Dimensions: 107mm x 90mm x 70mm

Clickable on a DIN rail

 

 

 

General description

The ACC8TMod allows you to acquire up to 8 temperature (which measure and precision range are dependant of the choosen model).

 

The ACC8T8Mod is Modbus compatible.

 

Temperature measurement

In using temperature sensors, only the temperature information will be available.

The measurement of temperature  is done with digital sensors communicating with the ACC8TMod. Due to the digital nature of the dialog between the sensor and the ACC8TMod, the communication is very robust. The precision does not depent on the wires length neither on the connections.

Compatible with all our program temperature sensors (based on DS18B20 or on Pt1000).

 

The sensors are connected to the ACC8TMod on a screw connector.

 

Modbus

Baud rate: 2400 bauds to 19200 bauds.

Address 1 to 15.

2 or 4 wires with or without termination resistor.

RTU or ASCII dialog.

Recognized commands: command 03 (read register(s)).

Registres allocation for command 03:

Register Number (decimal)

Content

          0

Sensor 1 Temperature in tenth of Celcius degree

          1

Sensor 1 status

          0: sensor OK

          1: sensor shorted

          2: no sensor

          3: temperature reading crc error

          4: reset condition

          5: sensor identification code reading crc error

          2

Sensor 2 Temperature in tenth of Celcius degree

          3

Sensor 2 status

          0: sensor OK

          1: sensor shorted

          2: no sensor

          3: temperature reading crc error

          4: reset condition

          5: sensor identification code reading crc error
         .....         .....
         .....         .....

          14

Sensor 8 Temperature in tenth of Celcius degree

          15

Sensor 8 status

          0: sensor OK

          1: sensor shorted

          2: no sensor

          3: temperature reading crc error

          4: reset condition

          5: sensor identification code reading crc error

 

Power supply:

The ACC8TMod is powered by a 8 to 35V DC voltage.

The ACC8TMod allows you to acquire up to 8 temperatures  (the measure and precision ranges are dependant of the choosen model)  with digital sensors.

 

The sensors can be wired with more than 100m without loss of precision due to the digital nature of the dialog between the sensors and the ACC8TMod.

 

Compatible with all our program temperature sensors (based on DS18B20 or on Pt1000) and the humidity sensor.

 

Powered with a 8 to 35V DC voltage.

 

Avantages

bulletInnovative solution for inputs / outputs and temperature / humidity management.
bulletModbus interface.
bulletLow price

 

Downloads

File

Content
 

 

 

Price

Description Reference

Price
ACC8TMod Modbus 8 Temp Sensor E05015 contact us
Regulated power supply 230VAC -> 24VDC/0.5A ESC-1.24.050S CHF 35.--
     

For more information: info@pongo.info

 

Please send an email to  webmaster@pongo.info for any questions or suggestions regarding this Web Site.

Envoyez un courrier électronique à webmaster@pongo.info pour toute question ou remarque concernant ce site Web.

Last modification / dernière modification : 29 mai 2024