Signal conditioner for one temperature / humidity sensor

 Dimensions: 78mm x 55mm x 23mm

General description

The SCTRH allows you to measure  1 temperature (which measure and precision range are dependant of the choosen model) and / or 1 humidity ranging from 0 to 100% RH and to output the results in analog voltages.

Two outputs are provided:

- one temperature output,

- one humidity output

.

Temperature and humidity measurement 

The measurement of temperature and humidity is done with a digital sensor communicating with the SCTRH. Due to the digital nature of the dialog between the sensor and the SCTRH, the communication is very robust. The precision does not depent on the wires length neither on the connections.

Temperature only measurement

In using temperature sensor, only the temperature information will be available.

The measurement of temperature  is done with digital sensors communicating with the SCTRH. Due to the digital nature of the dialog between the sensor and the SCTRH, the communication is very robust. The precision does not depent on the wires length neither on the connections.

Compatible with all our program temperature sensors (based on DS18B20 or on Pt1000).

Output ranges

The output ranges are as follows:

1) Temperature : 10mV/°C (0°C = 0V)

2) Humidité: 10mV/%

Output voltages précision

The used D/A converters having more bits than the sensors, the sensor's precision is kept.

Power supply

The SCTRH is powered with a DC voltage between 8 and 35V.

Case

Le SCTRH is in a small low cost plastic case.

Advantages

Downloads

Price

For more information: info@pongo.info

Please send an email to  webmaster@pongo.info for any questions or suggestions regarding this Web Site.

Envoyez un courrier électronique à webmaster@pongo.info pour toute question ou remarque concernant ce site Web.

Last modification / dernière modification : 29 mai 2024