[Logo de l'entreprise] 

GSM Remote Ctrl Temp - Humidity Solar Sensors Leds lighting, Dmx Modbus DmxMidi General

THS10
Remonter ACC8TMod ACC8T8RHMod SCTRH SC2T1TRH ACC4I6O6TRHMod ACC4I9O3TRHMod THS10 TS06-U

 

 

Remonter

 

USb configurable Hygro-thermostat

 

 

 Dimensions: 17mm x 110mm x 70mm

Clickable on a DIN rail

 

General description

The THS10 allows you to switch on or off a device depending of a remote measured temperature and / or humidité.

Configurable 230V/5A relays cycle and hysteresis.

Configuration with the USB with a windows based software.

 

The temperature measurement 

The temperature measurement is done with a digital sensor communicating with the THS10.

The sensor can be wired with more than 100m without loss of precision due to the digital nature of the dialog between the sensor and the THS10.

Compatible with all our program temperature sensors (based on DS18B20 or on Pt1000).

The sensor is connected to the THS10 on 2 screw connectors.

 

The humidity measurement 

The humidity measurement is done with a digital sensor communicating with the THS10.

The sensor can be wired with more than 100m without loss of precision due to the digital nature of the dialog between the sensor and the THS10.

Compatible with all our program hymidity sensors.

The sensor is connected to the THS10 on 2 screw connectors.

 

The relays

The THS10 has two internal 230V/5A relays. The 3 points (C, NO and NC) are available on screw connectors.

 

Power supply

The THS10 is powered by a 8 to 35V DC voltage on 2 screw connectors.

 

Configuration

The THS10 is configured with an USB connection and a windows based software.

The configurable parameters are:

- The temperature relay polarity (relay acts under or over a temperature)

- The temperature hysteresis cycle.

- The humidity relay polarity (relay acts under or over a humidity)

- The humidity hysteresis cycle.

During the connection, the PC screen shows permanently the temperature, the humidity, the relays states and the sensor status.

The parameters are saved in the non-volatile memory of the THS10.

 

Advantages

bulletInnovative solution for temperature and / or humidity management
bulletUSB configurable
bulletLow price

 

Downloads

File

Content

Prospectus

THS10 brochure in pdf format (actually only in french)

Short form

THS10 connections short form in pdf format (actually only in french)

User manual

THS10 user manual (actually only in french)

Configuration software

THS10 configuration software install

 

 

 

Price

Description Reference

Price

THS10 Hygro-thermoswitch USB E10532 CHF 245.--
Regulated power supply 230VAC -> 24VDC/0.5A ESC-1.24.050S CHF 35.--
     

For more information: info@pongo.info

 

Please send an email to  webmaster@pongo.info for any questions or suggestions regarding this Web Site.

Envoyez un courrier électronique à webmaster@pongo.info pour toute question ou remarque concernant ce site Web.

Last modification / dernière modification : 15 décembre 2023